Skip to content

Energy Matters: October 2025

/
/
/
/
Energy Matters: October 2025

In this issue of Energy Matters, we bring you all things around energy audits including a helpful checklist to prepare key documentation for your assessor, an overview of the three different levels of energy audits to consider, and a reminder to check your buildingโ€™s current energy performance by logging into HSCโ€™s Utility Management Program. Enjoy the read!

In this issue:


Planning an Energy Audit – What to Prepare

Energy audits can identify opportunities to address your utility consumption, from improving operational practices to upgrading to higher-efficiency equipment. Along with a building condition assessment, an energy audit is an important report to inform your capital plan for future improvements and equipment renewal.

To ensure a smooth audit process, itโ€™s a good idea to collect key building documentation even before you contract an auditor.

Compiling up-to-date building documentation in advance of your energy audit is a necessary first step in the energy audit process. Having the relevant document ready before you contract an auditor will result in a timelier and better-quality audit.

Important materials to collect in advance of the audit include:

  • Drawings relevant to the systems to be targeted, preferably โ€œas-builtโ€ drawings if accurate
  • Operations and Maintenance manuals
  • Recent engineering building assessments and reports
  • Testing, adjusting, and balancing reports
  • Original design documents
  • A list of equipment including nameplate information, dates of installation, and submittals including pump and fan curves
  • A list of regularly used outside service contractors
  • Copies of current service contracts
  • Control system documentation, such as sequences of operation, special control strategies, control diagrams, points list, and control programs or codes
  • Current energy-efficient operating strategies
  • Utility bills and/or accounting information for at least the last 36 months, with any relevant supply contract information for each utility type (gas, electricity, water, steam, etc.)

As well as preparing documentation, itโ€™s important to choose the right level of energy audit for your facility. There are three main levels of energy audits defined by the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE), each with different degrees of detail and analysis.

A minimum of ASHRAE Level II audit is typically recommended for multifamily buildings since it provides detailed energy analysis, calculations, and financial analysis and identifies a greater range of savings opportunities than the more basic Level I audit. Be sure to speak to your utility about available incentives and eligibility before you select a level.

As a final tip for a successful audit, itโ€™s helpful to have your regular HVAC service contractor onsite on the day of the site visit to answer any technical questions the auditor may have. Plan to make arrangements once your site visit date is set.

After you receive the audit report, have your consultant review it with you and your board to explain the various savings opportunities, risks, and impacts. Then, as you decide on projects, integrate them into your capital plan. Checklist summarized from: California Commissioning Guide: Existing Buildings, 2006


Get the Best Energy Audit: Which ASHRAE Level to Choose

Energy audits can identify potential energy conservation measures (ECMs) to undertake in your building to reduce your utility use. They are a critical document to inform your capital planning as well as your operations and maintenance (O&M) strategies.

However, not every energy audit is equal. The American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) defines guidelines for three levels of energy audit, each with different degrees of detail and analysis. Selecting the right level can ensure you get best information to support your project decisions.

ASHRAE Energy Audit Levels

All ASHRAE audits involve a site walk-through, analysis of utility bills, benchmarked site energy usage, and estimates of energy and cost savings. The higher the audit level, the more accurate and detailed the analysis and report. You can choose from:

ASHRAE Level I Audit:

Considered a starting point, this is an introductory assessment typically suitable for small buildings with simple energy systems. It involves a site walk-through and basic review of energy bills, building systems, and operations and maintenance activities. It identifies no- and low-cost ECMs that can readily be implemented and confirms if a more detailed audit is advised.

Itโ€™s not necessary to do a Level I audit before doing a Level II or III audit.

ASHRAE Level II Audit:

This level goes deeper than Level I and is for larger buildings with complex energy systems. It balances the need for more expert analysis with the need for a cost-effective audit.

In addition to the walk-through, the assessor collects on-site data and conducts a more detailed review of utility bills and energy-consuming systems, such as heating, cooling and ventilation (HVAC), lighting, and water heating. Energy modelling is done to determine energy savings potential, costs, and payback periods to support the business case for each ECM. The ECMs include both no/low-cost projects and more sophisticated projects requiring greater investment and medium to high energy savings.

ASHRAE Level III Audit:

This audit builds on Level II with more rigorous engineering analysis and monitoring of the buildingโ€™s energy use. It focuses on cost-intensive improvements requiring major capital investment. Additional data is collected via trend logs, data loggers, and submetering, and an energy model is created to simulate building performance. The audit includes project quotes from vendors, life-cycle cost analysis, and risk assessment and considers interactions between systems and ECM impacts.

Thanks to the depth of analysis, this audit level is considered to have increased accuracy of estimated savings, costs, and payback and can provide a better understanding of possible performance outcomes. It is substantially more expensive than either Level I or II so is typically reserved for highly complex buildings.

Remember to speak to your utility about available incentives prior to contracting an energy assessor. And donโ€™t forget to prepare key documentation from this checklist before you begin.

For further reading, check out:


How’s your Building Energy’s Performance?

If your building is enrolled in HSCโ€™s Utility Management Program (UMP), you can log-in to see how well it is using energy and water. We enter your natural gas, electricity, and water data into the online system so that you can focus on helpful dashboards and reports that show your energy and water performance month to month and year over year.

As a bonus feature, if youโ€™re planning an energy audit, you can ask our team to help export your historical utility bill data so you donโ€™t have to hunt down old bills for your assessor.

If you have questions about your UMP results, contact HSC Energy Services โ€“ weโ€™d be happy to help!

Stay up-to-date on energy and insurance news, events, or updates from our CEO.

Join Our Mailing List!